brother wireless setup wizard for macintosh

Even if you have printed with USB connection, you need to install the printer driver for network connection.

Follow the on-screen instructions to install the printer driver for network connection.

Disconnect the network cable between your access point (hub or router) and the printer, and click Next.

Confirm the security setting of your wireless network collected in STEP I and try starting from Step 4 again. Click here to see the details of how to reset the machine back to factory settings. Reset the print server back to its factory default settings. This is probably due to incorrect security settings. Wireless setup was unable to associate with a wireless network. If your status is not 'Link OK', go to Step 16.Ĭlick Next. If your status is ' Link OK', go to Step 17. Choose the status as it is shown for the Wireless Link Status on the Printer Settings page. The printer will print the current printer settings page.Ĭheck the printed Printer Settings page. Make sure that the front cover is closed, press Go button three times within 2 seconds. When the following screen appears, please check your machine's wireless status by printing the Printer Settings page. Then enter the Network key and Confirm Network Key, and then click Next. Choose the Authentication Method and Encryption Mode from the pull-downs in each setting box. When configuring your Brother wireless printer, you must configure your printer to match the Authentication and Encryption settings you recorded earlier for your existing wireless network.

If your network is configured for Authentication and Encryption, the following screen will appear.If not, click OK and then continue to Step 13. After configuring, please try to start again from the beginning. If you would like to configure security settings of your WLAN access point/router, click Cancel to exit the wizard. We recommend that you configure security settings of your WLAN access point/router to prevent unauthorized access to your network. This screen will appear if you choose the Network Name (SSID, ESSID) of the unsecured WLAN access point/router. If the following screen appears, follow this step.

Brother wireless setup wizard for macintosh